Cabinet and Drawer Pulls With 12-5/8" Hole Spacing

For extra-wide drawers, large kitchen islands, custom cabinetry, or oversized furniture, our 12-5/8" (~320 mm) cabinet pulls offer the reach, balance, and proportional look needed for large-scale hardware — all drilled for approximately 320–321 mm center-to-center spacing.

Browse a broad selection of finishes and styles — from modern matte black bars to brushed nickel, polished chrome, oil-rubbed bronze, and brushed brass — all compatible with 12-5/8" hole spacing for easy installation.

What does 12-5/8" (~320 mm) hole spacing mean?

Hole spacing (also called center-to-center or CTC) is the distance between the centers of the two mounting screw holes. With 12-5/8" spacing, those holes are about 12.625" apart — roughly 320 mm (often listed around 321 mm).

• Every pull in this collection is drilled to match this wide spacing.
• Ideal for wide drawers, large cabinet doors, islands, and custom furniture where smaller pulls look undersized.

How to measure for 12-5/8" / ~320 mm spacing

1. Remove one existing pull (optional, but easiest).
2. Measure from the center of one screw hole to the center of the other.
3. If it’s about 12.625" (≈ 320 mm), this collection is the match.

Because this is larger than typical cabinet pull spacings, we recommend double-checking your measurement before ordering — especially on custom cabinetry or wide storage pieces.

Styles & finishes available for 12-5/8" pulls

• Finishes: matte black, satin/brushed nickel, polished chrome, oil-rubbed bronze, brushed brass/gold-tone, and more
• Styles: long straight bar pulls, modern linear handles, contemporary and traditional designs
• Great for: large kitchen drawers, island cabinets, pantry doors, wardrobes, built-ins, and oversized furniture

Use the page filters to narrow your selection by finish, style, overall length, or price — while locking in the required 12-5/8" spacing for proper fitment.

When to choose 12-5/8" (~320 mm) pulls

• Your existing holes are 12-5/8" (≈ 320–321 mm) center-to-center
• You have extra-wide drawers, large cabinet doors, islands, or oversized furniture that needs a longer pull
• You want hardware that visually balances wide cabinetry (instead of looking too small)

On wide drawers and large cabinet fronts, long pulls deliver better grip, better leverage, and a balanced look — ideal for heavy-use spaces and large-scale cabinetry.

Frequently Asked Questions

Is 12-5/8 inch the same as ~320–321 mm for cabinet pulls?

Yes — 12-5/8" is approximately 320–321 mm center-to-center.

How do I know if my cabinets use ~320 mm spacing?

Measure center-to-center between screw holes. If it’s around 12.625" (≈ 320–321 mm), this size should fit.

Are 12-5/8" pulls good for wide drawers and large cabinets?

Yes — they’re ideal for wide drawers, islands, pantry doors, wardrobes, and oversized furniture where longer pulls look proportional and feel easier to grip.

Can I replace existing hardware with 12-5/8" pulls without drilling new holes?

Yes — if your existing spacing is already ~320–321 mm (12-5/8"). If your spacing is different, drilling may be required.