Cabinet and Drawer Pulls With 4" (102mm) Hole Spacing

If your cabinets or drawers are drilled for 4" (102 mm) center-to-center hole spacing, this collection brings together all of our compatible pulls — making replacement or new hardware selection simple and precise.

Browse a wide array of styles and finishes — from matte black and brushed nickel to polished chrome and classic brass — all with the same 4" (102 mm) spacing to fit your existing holes or cabinetry setup.

What does 4" (102 mm) hole spacing mean?

Hole spacing (also called center-to-center or CTC) is the distance between the centers of the two mounting holes on your cabinet or drawer front. With 4" spacing, the screw holes are 4 inches apart — approximately 102 mm center-to-center.

• Every pull in this collection is drilled to match 4" / 102 mm spacing.
• That means you can replace pulls without redrilling or filling old holes (as long as your existing spacing matches).

How to measure your existing hardware before ordering

1. Remove one existing pull.
2. Measure from the center of one screw hole to the center of the other.
3. If it’s about 4" (≈ 102 mm), choose any pull from this collection for a no-drill fit.

Because 4" (102 mm) is a popular “mid-size” spacing, it works well for standard drawers, cabinet doors, and furniture that needs a slightly longer pull than 3" or 96 mm sizes.

Styles & finishes available in 4" (102 mm) pulls

• Finishes: matte black, satin/brushed nickel, polished chrome, oil-rubbed bronze, brushed brass/gold-tone, and more
• Styles: modern bar pulls, transitional & traditional pulls, square or rounded bars, arch pulls, minimalist handles
• Great for: kitchen & bathroom cabinets, vanity drawers, built-ins, furniture, closets, laundry rooms, and more

Use the filters on this collection page to refine by finish, style, overall length, or price — while maintaining the same 4" (102 mm) hole spacing.

When to use 4" (102 mm) cabinet pulls

• Your existing cabinet or drawer holes are spaced 4" apart center-to-center
• You want a pull that’s slightly longer and easier to grasp than 3" or 3-3/4" pulls
• You’re updating wider/heavier drawers or doors and want better leverage and balance
• You want a balanced look on medium-size drawers where a full-length pull might look too heavy

For very wide drawers or pantry doors you may still want longer pulls — but 4" pulls offer a great balance of size, comfort, and compatibility for many standard cabinets.

Frequently Asked Questions

Is 4 inch the same as 102 mm for cabinet pulls?

Yes — 4" equals 102 mm center-to-center hole spacing.

How do I know if I need 4" (102 mm) pulls for my cabinets?

Measure center-to-center between screw holes. If it’s about 4" (≈ 102 mm), 4" / 102 mm pulls should fit with no drilling.

Will a 4" pull fit most drawers and cabinets?

A 4" (102 mm) pull is a versatile mid-size option for many drawers and medium-size doors. Very wide drawers often look best with longer pulls.

What if my existing holes don’t match 102 mm spacing?

If your spacing is different (76 mm, 96 mm, 128 mm, etc.), a 4" / 102 mm pull won’t line up without redrilling. Matching spacing avoids misaligned pulls.