Cabinet and Drawer Pulls With 3-3/4" (96mm) Hole Spacing

Many modern cabinets and imported kitchens use 3-3/4" (96 mm) center-to-center hardware. This collection brings together all of our 3-3/4 inch / 96 mm cabinet pulls so you can replace existing hardware without drilling new holes.

Browse a wide range of styles and finishes — from sleek black bar pulls to brushed nickel, chrome, and warm brass looks — all with the same 3-3/4" (96 mm) hole spacing.

What does 3-3/4" (96 mm) hole spacing mean?

Hole spacing (also called center-to-center) is the distance between the two screw holes on your cabinet or drawer front. 3-3/4" means the distance from the center of one screw hole to the center of the other is 3.75" — which equals 96 mm.

• If your existing pulls measure 3-3/4" (or 96 mm) between holes, any pull in this collection should fit with no new holes.
• 96 mm is common in European-style and newer cabinet lines, especially in kitchens and vanities.

How to measure your existing cabinet pulls

1. Remove one existing pull from the cabinet door or drawer front.
2. Measure from the center of one screw hole to the center of the other.
3. If it’s about 3-3/4" (3.75") or close to 96 mm, your spacing is 96 mm.
4. Choose any pull from this page for an easy, no-redrill replacement.

You may also see this size listed as 3-3/4" pulls, 96 mm pulls, or 3.75" center-to-center — they all refer to the same spacing.

Styles & finishes for 3-3/4" (96 mm) pulls

• Finishes: matte black, satin/brushed nickel, polished chrome, oil rubbed bronze, brushed brass/gold, and more
• Styles: modern bar pulls, contemporary square pulls, classic arch pulls, cup pulls, and transitional designs
• Great for: kitchen cabinets, bathroom vanities, laundry room cabinets, built-ins, and home office storage

Use the filters on this page to narrow by finish, style, overall length, or price — while keeping the same 96 mm (3-3/4") hole spacing.

When to choose 3-3/4" (96 mm) cabinet pulls

• Your existing hardware measures 96 mm / 3-3/4" center-to-center
• You have European-style or frameless cabinets drilled for metric spacing
• You want a slightly longer pull than 3" (76 mm) for a more modern, proportional look
• You’re updating cabinets and want a common, easy-to-find replacement size

You can also mix 96 mm pulls on upper cabinets with longer pulls (like 128 mm or 160 mm) on larger drawers and pantry doors for a designer look.

Frequently Asked Questions

Is 3-3/4 inch the same as 96 mm for cabinet pulls?

Yes — 3-3/4" equals 96 mm center-to-center hole spacing.

How do I know if my cabinets use 96 mm spacing?

Measure center-to-center between screw holes. If it’s about 3.75" (≈ 96 mm), you have 96 mm spacing.

Can I install 3-3/4" pulls without drilling new holes?

Yes — as long as your existing pulls are also 96 mm / 3-3/4" center-to-center. Then any pull in this collection should fit the same holes.

Are 96 mm cabinet pulls a standard size?

Yes — 96 mm is a very common metric spacing, especially on newer and European-style cabinets.