Is 3-1/2 inch the same as 89 mm for cabinet pulls?

Yes. 3-1/2 inch center-to-center spacing is approximately 89 mm. Both measurements describe the distance between the screw holes on the back of the cabinet pull.

How do I know if my cabinets use 89 mm spacing?

Remove an existing pull and measure from the center of one screw hole to the center of the other. If it measures around 3.5 inches (about 89 mm), then you need pulls with 3-1/2" / 89 mm hole spacing.

Will 89 mm pulls fit standard cabinets?

Only if the existing holes are spaced 89 mm (3-1/2"). Since 89 mm is less common than standard 76 mm or 96 mm, 89 mm pulls typically fit only cabinets or drawers drilled specifically for that spacing.

What if my cabinet holes don’t match 89 mm spacing?

If your current holes are a different spacing (e.g. 76 mm or 96 mm), 89 mm pulls won’t fit properly. In that case, choose a pull matching your measurement or plan for redrilling.

Cabinet and Drawer Pulls With 3-1/2" (89mm) Hole Spacing

3-1/2 Inch (89 mm) Cabinet Pulls & Drawer Handles

Need a slightly non-standard fit? This collection of 3-1/2 inch (89 mm) cabinet pulls is designed for cabinets or drawers drilled with that hole spacing, making replacements easier when standard 3″ or 3-3/4″ pulls don’t match.

Browse a variety of styles and finishes — from modern black bars to polished chrome, brushed nickel, and warm brass — all built for 3-1/2" (89 mm) center-to-center spacing.

What Does 3-1/2" (89 mm) Hole Spacing Mean?

Hole spacing — or center-to-center spacing — refers to the distance between the centers of the two screw holes on a cabinet or drawer front.

A 3-1/2 inch spacing indicates the two holes are spaced 3.5 inches apart.
In metric terms, this is approximately 89 mm center-to-center.
If your existing cabinet hardware measures 3-1/2" (or ~89 mm), pulls from this collection will fit without redrilling.

This size tends to be less common than 3″ or 96 mm, but necessary when cabinets are drilled for that spacing — and for those situations, this collection makes replacements straightforward.

How to Measure for 3-1/2" / 89 mm Spacing

Remove an existing pull from your cabinet or drawer front.
Use a ruler or tape measure to measure from the center of one screw hole to the center of the other.
If the measurement is approximately 3.5 inches — or around 89 mm — then your spacing is 3-1/2" / 89 mm.
Select any pull from this collection — it will match your existing hole spacing for a no-drill swap.

Because 89 mm is less commonly offered, it’s important to confirm your measurement carefully before ordering.

Styles & Finishes Available

This 3-1/2" / 89 mm collection includes a wide variety of cabinet and drawer pull styles and finishes to match many décor types:

Finishes: matte black, satin/brushed nickel, polished chrome, oil rubbed bronze, brushed brass / gold-tone, and more
Design styles: modern straight bars, transitional pulls, classic arch pulls, minimalist handles, and more
Applications: kitchen cabinets, bathroom vanities, closets, laundry rooms, and built-in storage furniture

Because 89 mm is less common than standard sizes, this collection is especially useful for older or custom cabinetry with nonstandard drilling.

When to Choose 3-1/2" (89 mm) Cabinet Pulls

Consider 3-1/2" / 89 mm pulls if:

Your existing cabinet hardware measures 3.5" (or about 89 mm) center-to-center
You own older, custom, or imported cabinets drilled to non-standard sizes
You’re replacing pulls but want to avoid drilling new holes or modifying doors
You want to maintain consistent hole spacing across multiple cabinets with the same original drilling

If you’re unsure which spacing you need, double-check your measurement before ordering — 3-1/2" / 89 mm is less common, so accuracy is more important than with standard sizes.

Shop Cabinet Pulls by Hole Spacing

Or shop all sizes in our full Cabinet Knobs & Pulls collection.